Skip to main content
BinghamtonConcrete Co
Crane setting a precast concrete bridge span on a precast concrete highway project serving Vestal, NY

Broome County · New York

Precast Concrete Products for Vestal, NY

Plant-cast structural and drainage concrete products manufactured under controlled conditions, delivered and set on your site by our own crews and cranes.

  • Over 40 years casting for heavy highway and general construction across upstate NY and northern PA
  • NPCA Quality Certified plant with documented QC on every pour
  • In-house engineering — shop drawings and submittals without a third-party delay
  • Our own trucks and cranes, so delivery and set are one accountable scope

12 minutes from our plant at 18 Phelps St, Binghamton. Mon–Fri, 7am – 4pm.

Free Vestal Quote

Send plans or dimensions — we reply the same business day. Or call (607) 258-6927.

Your details go straight to our estimating desk in Binghamton, NY. We typically respond the same business day.

Precast Concrete · Vestal, NY

Precast Concrete built for Vestal conditions

Vestal is a twelve-minute run from our yard, and the town's split between flat river terrace and steep hillside means we ship two very different product mixes into the same ZIP code. That local knowledge is the difference between a precast concrete order that fits the hole and one that costs you a day of crane time. Binghamton Concrete Co has been supplying Broome County since 1982.

The technical detail behind a Vestal order covers NYSDOT Section 704 aggregate, property value, AASHTO HS-25 loading and load rating. We put all of it on the shop drawings, stamp them, and route the package through Vestal Planning Board review so nothing surfaces after the units are cast.

Our trucks reach Vestal on NY Route 434 (Vestal Parkway) and NY Route 26, covering everything from the Vestal Museum, Arnold Park and the Vestal Rail Trail. Demand in this market is driven largely by Binghamton University campus expansion and utility infrastructure and hillside residential development requiring engineered retaining structures, and we stock and schedule accordingly.

Local design factors

What Makes Vestal Different

The same product drawing does not work everywhere. These are the local conditions we design around when we cast for Vestal, New York.

Flood history and groundwater

The river flats north of Route 434 fall inside the regulated floodway, and Choconut and Tracy Creeks both carry flashy runoff after summer storms.

Soils and site conditions

Underfoot, Vestal sits on flat Susquehanna terrace gravels along the Parkway giving way abruptly to steep Lordstown and Mardin hillside soils with a fragipan that perches groundwater above the restrictive layer. That drives the bedding course, the backfill gradation and, on retaining structures, the drainage detail behind the wall.

Frost depth and bearing in Broome County

Design frost depth across Broome County is 42 inches. Any precast concrete bearing surface has to be founded below that line, or the unit will heave and rack the joints in the first hard winter.

Climate and freeze-thaw exposure in Vestal

Vestal runs roughly 50 freeze-thaw cycles a year and averages 80" of snow, so every unit we cast for Broome County uses air-entrained concrete rated for repeated freeze-thaw cycling. Vestal's hillside subdivisions mean a large share of local work is grade separation — retaining structures doing real soil-retention duty, not decoration.

Permits and code review in Vestal

Plans in Vestal are reviewed by the Town of Vestal Building and Code Enforcement, working from the 2020 Building Code of New York State, Town of Vestal Zoning Code Chapter 24 and Town of Vestal Stormwater Management Local Law. Septic, holding tank and any on-site wastewater structure also goes through Broome County Health Department. We prepare submittal packages in the format those offices expect, which is usually the difference between a two-week review and a two-month one.

Product range

Precast Products We Deliver to Vestal

Standard units ship from the yard; anything else is cast to your drawings. All of it is delivered and set by our own crews across Broome County.

  • Multi-cell precast box culvert precast concrete project completed in Vestal, NY

    Box Culverts

    Single- and multi-cell precast box culverts engineered to AASHTO HS-25 loading for stream crossings, roadway drainage and utility runs.

  • Precast concrete retaining wall system engineered for a hillside site in Vestal, NY

    Retaining Walls & Block

    Gravity block, cantilever and modular retaining wall systems with a range of architectural face finishes for grade separation and slope stabilization.

  • Precast concrete manhole and pipe sections stacked in the yard for delivery to Vestal, NY

    Manholes & Catch Basins

    Precast sanitary and storm manholes, catch basins, inlets and risers in standard and custom diameters with cast-in pipe openings.

  • Large precast concrete utility vault loaded for delivery to a precast concrete site in Vestal, NY

    Electrical & Utility Vaults

    Traffic-rated transformer pads, pull boxes, handholes and communications vaults built to utility standards with knockouts placed to your drawings.

  • Precast concrete highway barrier separating traffic on a work zone near Vestal, NY

    Highway & Jersey Barrier

    Temporary and permanent concrete barrier, median units and bin blocks for work zones, laydown yards and permanent traffic separation.

  • Precast concrete bridge beams and abutment components on a precast concrete crossing near Vestal, NY

    Bridge Components

    Precast abutments, wingwalls, headwalls, approach slabs and deck panels that shorten bridge closures from months to days.

  • Watertight precast concrete tanks and manhole structures staged for installation in Vestal, NY

    Septic & Water Tanks

    Watertight precast septic tanks, pump stations, grease interceptors and cisterns tested to ASTM C1227 vacuum standards.

  • Demoulding a custom precast concrete unit cast for a precast concrete order bound for Vestal, NY

    Custom Precast

    Made-to-order structures cast from your engineer's drawings — if it can be detailed, our form shop can build it.

Our process

How a Vestal Order Runs

  1. 1

    Takeoff & Budget Pricing

    Send plans, a sketch or even a photo with dimensions. We return a line-item quote with unit counts, freight and set costs — usually within one business day.

  2. 2

    Shop Drawings & Submittals

    Our in-house design team produces P.E.-stamped shop drawings and submittal packages formatted for review by your engineer and the permitting authority.

  3. 3

    Plant Production & QC

    Units are cast indoors under controlled temperature and humidity. Every pour is slump- and air-tested, with cylinder breaks documented for your file.

  4. 4

    Delivery & Crane Set

    We schedule delivery to your pour date and set with our own trucks and cranes, so you are not coordinating three vendors on set day.

Credentials

Why Vestal Buys From Us

  • Licensed & Insured

    Fully licensed and carrying full general liability and workers' comp coverage in New York and Pennsylvania.

  • NPCA Quality Certified Plant

    National Precast Concrete Association certified plant, audited annually for production and QC standards.

  • NYSDOT Approved Producer

    Approved manufacturer for NYSDOT, PennDOT, NYSOGS and the U.S. Army Corps of Engineers.

  • Satisfaction Guarantee

    Every unit is inspected before it leaves the yard, and we stand behind the fit on delivery.

  • NPCA
  • NYSDOT
  • PennDOT
  • ACI
  • USACE
  • AGC NYS

Certifications and approvals held by Binghamton Concrete Co.

Vestal Customer Reviews

Feedback from contractors, municipalities and property owners in and around Vestal, New York.

  • The lot dropped almost fourteen feet front to back. They sized the wall system, gave us the block layout course by course, and it went up in two days with our own crew.
    KKevin M.General Contractor · Residential builder, Vestal
  • We needed traffic-rated vaults with knockouts in non-standard locations. They cast to our drawings instead of talking us into a stock unit, which is exactly why we called them.
    PPriya N.Facilities Engineer · Institutional campus, Vestal

Vestal Precast Concrete Questions

Permits, frost depth, lead times and pricing — answered specifically for Vestal, NY.

Do I need a permit for precast concrete work in Vestal, NY?

In most cases, yes. Structural work, drainage structures and retaining walls over four feet in Vestal are reviewed by the Town of Vestal Building and Code Enforcement under the 2020 Building Code of New York State. On-site wastewater structures also require sign-off from Broome County Health Department. We supply P.E.-stamped shop drawings and product data formatted for that submittal, but the permit application itself is filed by you or your contractor of record.

Is precast concrete a good choice given Vestal's flooding history?

It is often the better choice. The river flats north of Route 434 fall inside the regulated floodway, and Choconut and Tracy Creeks both carry flashy runoff after summer storms. Plant-cast units are produced under controlled conditions to a consistent density and air content, which means far lower permeability than a field pour made in weather — and buried structures can be detailed watertight to ASTM C1227 with tested joint sealant. Where groundwater or flood levels are a factor we also run buoyancy calculations and add anti-flotation collars.

What does precast concrete cost in Vestal, NY?

Pricing depends on unit size, reinforcement, finish and how many pieces are on the load — small standard structures start around $850 delivered, while engineered box culverts and bridge components are quoted per project. Because Vestal is only 12 minutes from our plant, freight is a small line item here compared with buying out of a distant yard. Send plans or dimensions and we will return an itemized takeoff, usually within one business day.

How long does it take to get precast concrete delivered to Vestal?

Typical lead time is 2–4 weeks from approved shop drawings for made-to-order units, and often faster for standard products we carry in the yard. Vestal is about 12 minutes from our Binghamton plant, so we deliver on your pour date rather than to a freight window.

How deep do footings need to be for precast concrete in Broome County?

Broome County uses a 42-inch design frost depth, so the bottom of any bearing surface — footing, bedding course, or the base of a wall stem — should sit at or below 42 inches. Vestal runs roughly 50 freeze-thaw cycles a year, and a unit founded above the frost line will lift, rotate and open its joints within a season or two.

Are you a licensed and insured contractor in NY?

Yes. Binghamton Concrete Co is fully licensed and carries general liability and workers' compensation coverage in New York and Pennsylvania. Our plant is an NPCA Quality Certified facility and we are an approved producer for NYSDOT, PennDOT, NYSOGS and the U.S. Army Corps of Engineers. Certificates of insurance naming your project are issued on request before we mobilize to Vestal.

Why choose precast over pouring concrete in place in Vestal?

Speed and quality control. A cast-in-place structure on a Vestal site is at the mercy of weather, and with 80" of average snowfall the pour window is genuinely limited. Precast units are cast indoors under controlled temperature and humidity, cured, tested and then set in hours — which on NY Route 434 (Vestal Parkway) and NY Route 26 work can mean reopening a road in a day instead of a month.

Do you deliver and set the units, or do I need my own crane in Vestal?

We do both, and most Vestal customers use us for the full scope. We run our own trucks and cranes, so delivery and crane set are a single accountable line item rather than three vendors pointing at each other on set day. If you prefer to set with your own equipment, we will schedule delivery to your window and provide the pick weights and rigging points.

We Also Serve Nearby

Binghamton, Endicott, Johnson City and Owego — and the wider 150-mile radius around our Binghamton plant.

Talk to a precast concrete estimator about Vestal

Send plans, a sketch, or just dimensions. You will get an itemized takeoff for your Vestal job — usually within one business day.

  • Licensed & Insured
  • NPCA Quality Certified Plant
  • NYSDOT Approved Producer
  • Satisfaction Guarantee
Call (607) 258-6927Free Quote